|
How to do things AI Noob vs. Pro
List biggest files Free Open Source: Swiss File Knifea command line
Depeche View
command line
free external tools,
cpp sources
articles |
sfk udpsend host[:| ]port [options] [data] [data2] [...]
send an UDP message and optionally receive replies.
maximum message size is 2000 bytes. your network may
limit this further, e.g. to 1500 or 1000 bytes.
options
-listen wait for a single reply, and dump it.
-listen=n wait for so many replies and dump them.
-listenall receive endless.
-replyport=n specify replyport for listening.
-timeout=n wait up to n msec for replies.
-wide, -lean etc. change hex dump output format.
for details, type "sfk hexdump"
-flat print messages as plain text.
-showip show target ip in [sent ...] info.
-broad send broadcast. this option is normally
used with address 255.255.255.255
input data format:
0x123456 a hex string which is converted to binary
foo any other plain text is sent as is, but
zero termination is NOT done automatically.
all given data fragments are joined into one large block.
how long the block can be is system dependent, but it must
always stay below 2000 bytes.
multicast send
if a multicast group address is given, like
sfk udpsend 224.0.0.123 5000 testtext
then udpsend tries to send a multicast message.
this may or may not work depending on the OS, network
interface, router and firewall settings, user rights and
other programs running in parallel.
chaining support
small chain input data can be sent.
to send continuous text over 1k do not use udpsend
but tonetlog. type "sfk netlog" for more.
aliases
sfk udp like udpsend, but does not use chain input.
sfk cudp call udp quickly without any output,
same as sfk udp -quiet.
return code
0 ok
>0 send failed, or no -listen reply
examples
sfk udpsend localhost 5000 hello 0x00
send "hello" followed by a zero byte to localhost
on port 5000
sfk udpsend 127.0.0.1:5000 -listen -replyport 5010 test
send "test" to localhost on port 5000
and then receive a single reply on port 5010.
sfk echo foo +udpsend localhost:5000
sends "foo" with (CR)LF to localhost port 5000.
sfk echo foo +xed "/[eol]//" +udpsend localhost:5000
the same but strips (CR)LF line ending.
use "sfk udpdump 5000 -text" to receive.
sfk udpsend host[:| ]port [options] [data]
[data2] [...]
send an UDP message and optionally receive
replies. maximum message size is 2000
bytes. your network may limit this further,
e.g. to 1500 or 1000 bytes.
options
-listen wait for a single reply,
and dump it.
-listen=n wait for so many replies
and dump them.
-listenall receive endless.
-replyport=n specify replyport for
listening.
-timeout=n wait up to n msec for
replies.
-wide, -lean etc. change hex dump
output format. for
details, type "sfk
hexdump"
-flat print messages as
plain text.
-showip show target ip in [sent
...] info.
-broad send broadcast. this
option is normally used
with address 255.255.255.
255
input data format:
0x123456 a hex string which is
converted to binary
foo any other plain text is
sent as is, but zero
termination is NOT done
automatically.
all given data fragments are joined into
one large block. how long the block can
be is system dependent, but it must
always stay below 2000 bytes.
multicast send
if a multicast group address is
given, like
sfk udpsend 224.0.0.123 5000
testtext
then udpsend tries to send a multicast
message. this may or may not work
depending on the OS, network interface,
router and firewall settings, user
rights and other programs running in
parallel.
chaining support
small chain input data can be sent.
to send continuous text over 1k do not
use udpsend but tonetlog. type "sfk
netlog" for more.
aliases
sfk udp like udpsend, but does not
use chain input.
sfk cudp call udp quickly without any
output, same as sfk udp -quiet.
return code
0 ok
>0 send failed, or no -listen reply
you are viewing this page in mobile portrait mode with a limited layout. turn your device right, use a desktop browser or buy the sfk e-book for improved reading. sfk is a free open-source tool, running instantly without installation efforts. no DLL's, no registry changes - just get sfk.exe from the zip package and use it (binaries for windows, linux and mac are included).
|
